Cara Service Epson R210 / R230 Lampu Tinta dan Resume Blink / Berkedip Merah Cepat

Early indications:When the printer is turned on, then the printer will look normal and perform calibration with the movement of the head to the right and left regularly. But at the end of the calibration process stops printers total ink indicator lights and lights resume (which paper symbol) flashes / red blink rapidly. The printer was gridlocked.
Cause:Epson R210 / R230 Ink and Resume Lights Blink / Fast Red Flashing, caused by the closing of the sensor under the head by which ink overflow, and finally the printer will protect itself by stopping completely.




 

Solution Service Epson R210 / R230 Ink and Resume Lights Blink / Fast Red Flashing:
1. Uninstall Printer Epson R210 / R230.
2. Take headnya and see Head bottom, there you'll find a small sensor which is normally closed / immersed ink.



 




3. Clean the sensor R210 / R230 it.
4. If the problem is still the same ie Ink and Resume lights R210 / R230 still flashing / blink fast, then you have to replace the sensor along the cable.
5. Finish and the printer is ready to try .....
Good luck .....